Why Professional Grease Trap Cleaning is Essential for Australian Food Businesses

If you own a restaurant, you must have a grease trap. It will prevent problems caused by fat and oil deposition and allow your business operations to run smoothly. It collects solids from kitchen drains while allowing wastewater to flow directly to trenches. In this manner, the grease trap serves an important purpose by trapping solids and grease substances that, if released directly into the trenches, could clog and destroy them. Liquid waste from the kitchen enters the trap through an inlet and is trapped in the baffle walls of the device, trapping grease and semisolid waste while allowing water to flow out of the outlet into trenches or greywater holding tanks.

 

A grease trap is constructed of concrete, steel, or fibreglass and includes an inlet pipe and a raised outlet pipe. The trap baffles slow the flow of wastewater from your kitchen, causing food particles to sink to the bottom and oil and grease to rise to the surface. The device’s baffles create a barrier for FOG (fats, oils, and grease) waste while allowing water to flow underneath. To catch larger pieces of grease, many modern grease traps used in commercial establishments in Australia have additional filters or strainers. A grease trap is required for businesses to collect liquid waste and sludge, particularly those in the food industry. Professional grease trap cleaner service ensures that your grease trap operates at peak efficiency by removing sludge and grease from it, preventing it from overflowing and clogging the trenches.

 

Functioning of grease trap

 

Grease traps keep oil from flowing down the drain, preventing blockages. When wastewater enters the trap, a filtering system separates it from the grease. It traps fats, oils, and greases long enough for them to solidify on the surface, allowing the grease trap cleaner service to remove and dispose of them. The wastewater flows into another compartment and settles for a second time, further separating the grease and food particles. A grease trap ensures that slightly cleaner wastewater flows directly into the sewer system in this manner.

 

Over time, the trap becomes clogged with grease and must be cleaned in order to function properly. When trapped grease accumulates between baffle walls, it begins to flow out of the outlet and, as it solidifies, can block or destroy trenches. To avoid overflowing, the device must be emptied and cleaned.

 

How is the grease trap cleaned?

 

To avoid damaging the grease trap’s lid gasket, the operator will gently remove the lid and use a ruler to determine the amount of grease in the trap. The grease trap cleaner then uses a pump to remove water from the trap. To remove excess grease, the bottom, sides, and lid of the trap are scraped. The method prevents the rapid accumulation of debris that has been knocked loose but has not yet been removed. The trap is scrubbed in the same location, the screens are flushed, and the water is reintroduced. Before the lid is replaced, the grease trap cleaner replaces any removed parts.

 

Professional grease trap cleaners have the right equipment and skills

 

It is recommended that grease trap cleaner service be utilised regularly. Irregular cleaning can lead to fat deposits accumulating and settling along trap walls and pipes, causing corrosion and blockage further down the line. If you own a commercial establishment, such as a food outlet or a manufacturing unit, you should contact a professional grease trap cleaner service, such as Solo Resource Recovery. They have the necessary equipment and trained personnel to complete the cleaning task efficiently.

 

Disposing of grease trap waste in a compliant manner

 

Solo Resource Recovery’s professional grease trap cleaner services save you money on repair costs caused by clogged grease traps. The grease trap cleaner service is offered by professional waste collection and waste recovery solutions companies such as Solo, as a one-off project or as a scheduled maintenance service. Solo’s professional grease trap cleaner crew pumps all trap waste into a vacuum liquid waste truck. The collected liquid waste is disposed of in accordance with EPA regulations, while FOG waste is recycled.